We remove the old concrete, prep the base properly, and pour a new driveway that's built to last — serving Oregon City, Clackamas, Portland, and the surrounding area.
A cracked, heaving, or deteriorated driveway isn't just an eyesore — it's a tripping hazard, a drainage problem, and a drag on your property value. We handle the entire project from start to finish: breaking out the old slab, hauling it away, preparing the subgrade, and pouring new concrete that's properly formed, reinforced, and finished. No subcontractors. No handoffs. One crew, one standard.
Every driveway project follows the same disciplined sequence. Shortcuts at any stage show up as cracks, settling, or drainage problems later — so we don't take them.
We break out the existing concrete slab — whether it's a single-car apron or a full two-car driveway — and haul all debris off your property. You won't be left with a pile of broken concrete in your yard.
Once the old slab is out, we excavate to the correct depth and address any soft spots, tree roots, or drainage issues in the subgrade. A stable, uniform base is what prevents future settling and cracking.
We place and compact a crushed aggregate base layer to the specified depth. This is one of the most important steps — a properly compacted base distributes load evenly and keeps the slab from moving over time.
We set forms to establish the final grade, slope, and edges of the driveway. Proper forming ensures consistent slab thickness, correct drainage slope away from the structure, and clean finished edges.
Where appropriate — based on soil conditions, load requirements, and slab dimensions — we install rebar or wire mesh reinforcement before the pour. Reinforcement controls cracking and adds structural integrity.
We place, screed, and finish the concrete to a consistent surface. Control joints are cut at the right intervals to manage where the concrete cracks as it cures — keeping those cracks small, predictable, and out of sight.
Proper curing is what gives concrete its final strength. We apply curing compound or use wet curing methods as conditions require. Once the slab has cured, we clean up the site and walk you through care instructions.
Real projects, real results. These are driveways we've poured for homeowners across the Portland metro area.
Have a before-and-after photo from your project? Send it our way and we'll add it here.
If your driveway is cracked, uneven, or stained beyond repair, replacement is often the most cost-effective long-term solution. Here's what a new concrete driveway delivers.
A fresh concrete driveway is one of the highest-ROI exterior improvements you can make. It immediately improves the look of your property and makes a strong first impression.
Old driveways often develop low spots that pool water near your foundation or garage. A new pour is graded correctly from the start, directing water away from your home.
Heaved slabs, wide cracks, and crumbling edges are trip hazards. A new driveway gives you a smooth, even surface that's safe for foot traffic, vehicles, and kids on bikes.
Concrete installed on a proper base and cured correctly will last 30 years or more in Oregon's climate. You're not patching — you're starting fresh with a surface built to last.
Buyers notice driveways. A deteriorated driveway signals deferred maintenance. A clean, new concrete driveway signals a well-maintained home — and supports your asking price.
Unlike asphalt, concrete doesn't need periodic sealing to stay intact. An occasional rinse and a sealer every few years is all it takes to keep it looking sharp.
Ready to replace your driveway?
Free estimates — no pressure, no obligation.
We work throughout the Portland metro area and surrounding communities. If you're in any of these cities, we can come to you.
Not sure if we serve your area? Call (503) 658-5313 — we're happy to help.
Tell us about your project and we'll put together a free, detailed estimate. No pressure, no obligation — just a straight answer on what it will take.